When you have learned about the automatic floor mops named Braava and Peppermint you need to know they are exactly the same thing. Development Robotics is the company that made Mint. It was later bought by iRobot. The latter provided Peppermint for a while and now transformed their name to Braava. It is the same old Peppermint with a new name. Their rates do not vary either. And Peppermint is currently provided yet again with the name Development Robotics attached to it.
If you anticipate your Peppermint or Braava to function like the one in the industry you have to adjust the procedure a bit. You can see how to accomplish it below.
Peppermint (Braava) uses two forms of cleaning towels for the two cleaning modes. The bright towels can be applied dried in SWEEP mode. This is actually the setting you see applied in the industry wherever Peppermint (Braava) is moving in right lines and it seems like the road cleaned by the robot is shining automatic mopping machine and wet. But that shining cleanliness won't happen if Peppermint (Braava) is found in attract mode. It will happen if you are using the wet orange towels in MOP mode. But then the robot won't move around in wonderful right lines but alternatively back-forth for deeper cleaning. This will gradual it, of course.
To be able to produce Peppermint (Braava) move around in right lines with wet material you should just put the wet orange material really tightly on their pad (the reservoir one) and utilize the SWEEP mode. The tightness may be performed by folding one area of the material inwards a little; when it sticks out of the velcro strips it disrupts the detectors in the middle of the pad. Don't fill the reservoir pad if your floors are pretty clean. If the orange material becomes also wet the robot starts to struggle and can't transfer further.
Cleaning with dried material in attract setting is more like collecting dirt and pet-hair and driving them around. It is fantastic if you have plenty of those and need them piled-up for quick elimination but also for hair-free floors the wet material is a lot better.
For best effects:
Do not wet the bright towels that are designed to be utilized dried with the multi-purpose pad in attract mode. The motor won't manage to transfer Peppermint properly.
If you intend to use wet material in attract setting: flip inwards the orange material when attaching it to the velcro reel on the reservoir pad. This guarantees that the material is taken restricted and won't go back-forth to hinder the robot's easy movement.
Clean the orange material after each room.
Do not fill the reservoir of the reservoir pad if your floors are not covered with dust or pet-hair. If the material is also wet the robot cannot transfer properly.
Eliminate as much objects from a floor as possible. Way too many chairs will truly confuse Peppermint and it will miss spots.
Peppermint does a fantastic work mopping floors with medium amount of dust and number large particles.
It is quiet and fast, and may be used in all rug-free aspects of the house.